Want to change the look of your BRZ or 86 without braking the bank? Look no further! We offer a variety of attractive, lightweight wheels. To find out what will work best for your build, we made it simple and divided fitment recommendations into multiple categories: Daily Driver, Aggressive/ Stance, and Widebody builds.
Feel free to check out our 2022+ BRZ / GR86 Customer Gallery to see pictures of the wheels on the cars.
1. Recommended Sizes
To start, your car has a 5x100 bolt pattern (also known as PCD). Knowing your PCD is very helpful; we want to make sure your wheels bolt on!
Diameter: 17"-18"
Width: 8" - 9"
Offset: +30mm to +45mm
Bolt Pattern / PCD: 5x100
Additionally, it's important to make sure that the tires you select will provide adequate clearance. Tire size will vary depending on what wheels you choose. If you choose a larger diameter wheel, you'll likely want to shrink the sidewall of the tire to prevent rubbing. Keep in mind not to stretch the tire too much as it provides less protection for the wheels. One large pothole can end up bending your wheels.
2. Daily Driver
XT-206R 17x8 +30mm 5x100 - Pictured below is a 2022 BRZ with these wheels in gunmetal with a machined (polished) lip. These wheels fit flush without running camber. With a few degrees they will tuck like the white BRZ. No modifications are needed to run these, which makes them a phenomenal direct bolt-on. Since they're 17-inches, you also have room to run more tire (perfect for track builds and street cars!)
Colors offered: White, Black, Hyper Bronze, and Gunmetal with Machined Lip
R1 18x8.5 +35mm 5x100 - While these wheels are half an inch wider than the XT-206R 17x8, the offset is also higher, so the wheels don't fit as aggressive. With only 1-2 degrees of camber, you can get the wheels to tuck (like the BRZ pictured below). Cosmis Racing R1 provide a good balance between performance and aesthetics. The 12-spoke design also provides strength and stability, making it a durable choice for a wide range of driving conditions. Furthermore, the open design of a 12-spoke wheel can provide increased airflow to the brake system, which can improve cooling and brake performance.
Colors offered: White, Black, and Hyper Bronze
R1 18x8.5 +35 | 18x9.5 +35 5x100 - For those that want the OEM+ look. Who doesn't love a staggered set of wheels? If lowered, these will most likely end up rubbing a little bit unless you run camber.
XT-006R 18x9 +30mm 5x100 - With these specs you can go either towards the stancy side, run more camber to tuck, OR the track oriented with no camber. There will be minimal poke, and they honestly look good no matter which route you take. Unfortunately, we only found 1st gen owners running these. If you want to run these on your 2022+ BRZ or 86, hit us up for a custom quote. We might be able to help save you some money if you send us high-quality images in return. 😉
Colors offered: White and Hyper Bronze
Here's another BRZ with less camber to show you that the XT-006R 18x9 +30 can go both ways.
3. Aggressive / Stance
MR7 18x9 +25mm 5x100 - Due to these cars being new, we still haven't found any 2nd gen BRZ/GR86 running these, so we'll have to make do with a 1st gen picture for reference (sorry - maybe you can change this!) These are much more aggressive in the rear, so you'll likely need to run at least -5 degrees of camber to get them to tuck like @utmfrs's blue 2013 FR-S below. He's running our Hyper Bronze MR7 18x9 +25.
Instagram Owner @utmfrs
4. Widebody Builds
XT-006R 18x11 +8 5x114.3 *5x114.3 to 5x100 ADAPTERS REQUIRED* - Sorry (again), but we don't have images of the newest generation running these. We are becoming really repetitive, we know. 😅 We figured it wouldn't hurt showing you what others have done in the past.
