Estimated Read Time: 4 minutes 4 seconds
The BRZ, FR-S, and GT86 boasts a sleek profile that is both sporty and refined. One way to make this already impressive vehicle stand out, even more, is by fitting it with Cosmis Racing Wheels. These wheels were designed to not only enhance the appearance of your car, but also improve its performance on the road. We offer a variety of attractive, lightweight aftermarket wheels. To find what will work best for your build, we made it simple and divided fitment recommendations into multiple categories: Daily Driver, Aggressive/ Stance fitment, and Widebody Builds.
Feel free to check out our Subaru BRZ, Scion FR-S, & Toyota GT86 Customer Car Gallery to see pictures of the wheels on the cars.
1. Recommended Sizes
To start, your car comes from the factory with 5-lug wheels. More specifically, it has a 5x100 bolt pattern (also known as PCD). Knowing this is important; we want your wheels to bolt on!
Diameter: 17 to 18 inch
Width: 8 to 9 inch
Offset (ET): +30mm to +40mm
Bolt Pattern / PCD: 5x100 (5x3.93")
Lug Seat: 60º Conical
Hub Bore: 56.1mm - Our 5x100 wheels have a 73.1mm center bore, so we recommend purchasing ⭕ hub-centric rings ⭕
2. Daily Driver
XT-206R 17x8 +30mm 5x100 | Direct bolt-on!
Colors offered
These wheels fit flush without running camber. No modifications are needed to run these, which makes them a phenomenal direct bolt-on. Since they're 17-inches, you also have room to run more tire (perfect for track builds and street cars!)
Toyota GT86 with XT-206R 17x8 +30 5x100 in Gunmetal
Tires: 215/40/17 Michelin Pilot Sport 4
Suspension: Lowered on Eibach Springs 25mm
Spacers: None
No fender rolling needed
Instagram @gt86_josh
R1 18x8.5 +35mm 5x100 | Direct bolt-on!
Colors offered
While these wheels are half an inch wider than the XT-206R 17x8, the offset is also higher, so these will fit flush. The R1 provide a good balance between performance and aesthetics. The 12-spoke design also provides strength and stability, making it a durable choice for a wide range of driving conditions.
2014 Scion FRS with R1 18x8.5 +35 5x100 in White
Tires: 225/40R18 Continental ExtremeContact™ Sport
Suspension: BC Racing Coilovers
Owner @d.rubio100 | Photographer @sabrinamariahphotography
Lowered Subaru BRZ with R1 18x8.5 +35 5x100 in Black (for ultimate stealth!)
Tires: Hankook RS4 255/35R18
Suspension: BC Racing Coilovers
No fender modifications and no spacers needed. When hitting bumps in the road, the front and rear tires rub the fenders/ fender liners. Rolling the fenders is recommended if your car is this low.
Instagram @melvin.brz
XT-006R 18x9 +30mm 5x100 | Direct bolt-on!
Colors offered:
With these specs you can go either towards the stancy side, run more camber to tuck, OR the track oriented with no camber. There will be minimal poke, and they honestly look good no matter which route you take. See for yourself.👇
2020 Subaru BRZ with XT-006R 18x9 +30mm 5x100 in Hyper Bronze
Tires: 225/40R18 Michelin Pilot Super Sport
Suspension: AirLift Performance 3P
Owner @2fast2francis | Photographer @dannylegitness
2015 Subaru BRZ with XT-006R 18x9 +30mm 5x100 in White
Tires: 245/40R18
Suspension: Tein Flex Z Coilovers
Spacers: None
Fenders aren't rolled. Only rubs in rear over bumps. The front rub at full lock.
Instagram @nathanhui07
3. Aggressive / Stance
MRII 18x8.5 +22mm 5x100
MR7 18x9 +25mm 5x100
Colors offered:
XT-005R 18x9 +25mm 5x100 (Temporarily Discontinued)
While the discontinued version is presented here for your viewing pleasure, fear not, as we'll soon be restocking these beauties in a range of new sizes and offsets. These wheels can be used for track cars, daily drivers, or low n slow riders.😎
4. Widebody Builds
Fitting these wheels will require modifications, such as fender rolling or trimming, fender flares / widebody kit, suspension modifications, wheel adapters, and camber adjustment to achieve the perfect fitment. We aren't listing this under each wheel like we have done, since you already know it will take some work to rock these wheels on your car.
XT-006R 18x11 +8 5x114.3 *5x114.3 to 5x100 ADAPTERS REQUIRED*
Colors offered:
XT-206R 18x11 +8mm 5x114.3 *5x114.3 to 5x100 ADAPTERS REQUIRED*
Colors offered:
- White
- Black
- Black with Machined Lip
- Gunmetal with Machined Lip
- Hyper Bronze
- Hyper Gold
- Hyper Red
- Hyper Silver
S1 18x10.5 +5 5x114.3 *5x114.3 to 5x100 ADAPTERS REQUIRED*